ELECTRIC HEATING PRODUCTION(New Products)

Main product introduction JXQ ---Model FB automobile tail gas cat, apply to and dispel automobile harmful substance of tail gas, Properties of product assert through" industry association, environmental protection of China,", pass" research institute, automobile of Tsing-Hua University,"," environmental research institute of China"," discharge control centre of motor vehicle of Wuhan University" measures, The properties of product reach the standard of the 2nd of Ou state of the world level.

new material honeycomb pottery serial products" are the environmental protection industry, namely industrial waste gas, Abolish key products of aqueous cleaning is heat exchanger, regenerative body at the same time, Energy-conservation and first-selected material of the environmental protection products, such as energy-conserving gas kitchen, etc., Series of products this obtain Hunan" scientific technological achievement assay certificate" that provincial scientific and technological commission determine that the State Ministry of Science and Technology pass. This series of products have already been exported to U.S.A. group by group over the past several years, Germany, Korea S., Countries, such as Japan ,etc.. Honeycomb ceramic catalyst packing our company and a new generation industrial catalyst packing that institution of higher learning develop together, This series of products have a development prospect widely in the international market.

2. The purification of the tail gas of automobile, eliminate noise
   Automobile tail gas purification device adopt thin wall cordierite quality honeycomb ceramic carrier, The noble metal type of coating and rare-earth element, the excessive metal, etc. cover the catalyst made jointly, Automobile CO of coda, HC, NOx, etc. harmful to compositions, Burn through catalysis principle up to the discharge standard that the country stipulates. Main technology is criticized and marked
   (1) Catalyst get up temperature of firing 200-230˚C
   (2) Use the temperature range 250-950˚C
   (3) The normal service life of products is 80,000 kilometers( or 2 years)
   (4) Purify rate Co2.2g/km
   THC+NO*0.5g/km
   
    
3. Heat exchanger, regenerative body, the sweetening of the waste gas, Take off the nitrogen
   Utilize honeycomb to be ceramic heavier than the surface area, able to bear the high temperature, hold the characteristic such as being heavy of heat, Adopt special device and proper catalyst, utilize so as to remaining energy, economize cost, Protect the environment. Collect and economize energy with protect the environment and wait for multi-functional to on an organic whole ( machine), adapt to on power plant extensively, The smeltery, the large-scale equipment of the incinerator. Main technical indicator
   (1) Enter the temperature degree   Room temperature
   (2) Temperature of combustion chamber  ≥1280˚C
   (3) Most high to use temperature   1350˚C
   (4) The hot coefficient of expansion 2.5*10^-6 / ˚C
   (5) It is hot to shake performance ( the sample) 850˚C does not split three times
   (6) ≥%
   Heat conduction coefficient
   Heat holding
   
    
4. Industry's organic waste gas purification
   Regard thin wall honeycomb pottery of cordierite as carriers, utilize active alumina, Noble coating material, make with meticulous craft whole catalyst make thier have surface accumulate largly, Air current obstruction little, get up and fire low temperature is high to purify rate, Heat-resisting performance getting kind characteristic, apply petroleum, chemical industry to extensively, Smelt, the waste gas in coating, etc. is dealt with. Main technical feature
   (1) Purify rate ≥ 920%
   (2) 250 ˚C of ≥ of temperature
   (3) The catalyst bears temperature 1300˚C
   
    
5. Honeycomb pottery filter slice
   Properties of product:
   Applying to metallurgy mainly, cast the trade, this product is more heavily than the surface area, Mechanical intensity high, heat-resisting characteristic that assaults, can be strained and get rid of the metal and liquid impurity in casting the products, Reduce the air vent of castings, raise the quality of casting, reduce and cast the cost, Raise labour productivity. Main technical indicator
   (1) The utilization ratio increasing   5-10%
   (2) Casting tired intensity increasing by 15.5%
   (3) Spend 1700 ˚C fire-resistantly
   
    
6. Honeycomb pottery burns the board
   Utilize product this burn abundant, than surface area heavy characteristic, burn board installation in the proper position where the gas has honeycomb pottery, Can make fuel burn fully, improve kitchen temperature, so as to save time, Energy-conservation, purify the air. Main technical indicator
   (1) Economize the energy   15%
   (2) Improve the temperature the kitchen   200˚C is up to 1200˚C
   (3) Purifying the air, CO content reduces by 10 times than the ordinary kitchen after burning
   
    
7. High aluminium cordierite honeycomb pottery slice
   Regard high aluminium cordierite quality as main raw materials and make a board or round honeycomb ceramic carrier, The special catalyst of coating, make it become and have special intensity and toughness, Getting ruggedized, products of heat resistance, reach and can dispel petroleum, chemical products harmful gas of production process, Strain and get rid of petroleum, chemical products liquid residue of course, thus improve product quality. Main technical indicator:
   (1) Purify rate ≥ 95%
   (2) Catalyst tolerance temperature ≥ 300
   (3) Strain except that liquid residue

• low-temperature electro-thermal membrane (＜125℃)
• medium-temperature electro-thermal membrane (200℃ ---350℃)
• high-temperature electro-thermal membrane (350℃---600℃)
• Classification according to application :
  Medical far infrared electro-thermal membrane ,
  Beauty care and health care electro-thermal membrane
  Industrial application electro-thermal membrane
  Pet pad electro-thermal membrane
• Classification according to characteristic :
  Usual far infrared electro-thermal membrane
  PTC self temperature controlling electro-thermal membrane
  Water-proof electro-thermal membrane (washable , soft with deformation )

2. low-temperature electro-thermal membrane
   About low-temperature electro-thermal membrane :
   It was produced by printing electro-thermal body between two fireproof material . It heats at constant temperature mainly through infrared ray. It is soft and flexible and can be bended . It can be designed different specifications , voltage and power according to customers’ need.
   Main application :
   beauty care , electro-thermal pad, electro-thermal clothing , electro-thermal belt , industrial pipeline preservation , agriculture house , fog-proofing glass etc.
   
   
   
   
   
3. Pet pad electro-thermal membrane
   Pet pad electro-thermal membrane
   It was designed specially for pet . You can create a warm nest for your beloved pet if you install a pet pad in a cold winter . Temperature is controlled automatically . If you set a wanted temperature scope , the pad will keep working at this temperature under normal voltage . You needn’t worry overheating or under-heating.
   The size of pet pad can be decided by customers.
   There are various color options.
   
   
   
   
   
4. Water-proof electro-thermal membrane
   Model:
   • Type: Water-proof electro-thermal membrane
   • Power density: 0.3-0.65W/CM2
   • Voltage: 6--250V
   • Pressure-resisting grade: above3750V
   • Working life: above 30000 hours
   • Temperature: under 123 o C
   • Far infrared wavelengths:8-15μm
   • Heat rate in vertical direction: 86%
   • Infrared conversion rate : 68%
   • Finally there is a simple solution to those misted up mirrors in your bathroom.
   • With a simple to install mirror heaters you no longer have to wait for the mist to clear before shaving, drying your hair or putting on make up.
   • Running costs are negligible - based on one hours use per day, an average demister will cost just 0.2-0.3 dollar per week to run - a small price to pay for permanent mist free mirrors!
     
     
     
     
5. Ceramic Heater for Straightener
   Operation Guide
   • It must be covered with heat conducting silicon between heater and the surface of being heat, and press tightly which the pressure is appropriate
   • The lead of heating ought to be covered with Teflon pipe and it must be packed with temperature insulating adhensive tape
   • It ought the to be well installed with thermal controller which closed to heating
   • Two heating pieces must to be controlled which resistance tolerance at room temperature is ±2%
   • The heating must be used at stated volatge

   Products Specification

   Model （mm）	70×7×1.2、70×10×1.2 、70×15×1.2、70×20×1.2、70×30×1.2
   Rated Voltage	110V~220V
   Resistance（23±1℃）	30～60Ω、60～90Ω、 90~140Ω、 140～180Ω、180～220Ω
   Operational Temperature	100－300℃，Maximun Operational Temperature 500℃
   Insulation Resistance	1×106Ω
   Electric Strength	3750VAC/0.5mA/1s
   Lead Strength	3kg
   Lead	Ф0.5×70 mm

   The Advantages of Ceramic Heaters
   

   1.Superior Thermal Properties • High watt density 60W/cm2 • Rapid Heat Increase	2.R－T characteristics • It has the characteristic of positve temperature coefficient, and can test and control the temperature of heating element make use of the temperature of characteristics
   3.High Reliability • Superior dielectric strength and volume resistivity .So may contact with metal and water directly • lowageing and Long life	4.Environmental Qualities • No electric noise • Energy-saving • No Harmful element such as Pb

   
   
   
   
   
6. Heat pipe for Oven
   The heat pipe has excellent resistance to oxidation and outstanding electrical
   performance with azotized (at high temperature) surface. It has been exported to Japan and Europe.
   
   
   
   
7. electrothermal components >> electrothermal
   • high-density single-end electrothermal tube
   • type：SLM3
   • traits:≤450℃.With sudden calefaction and working temperature lower than 450℃
   • use：
     Being used in plastic mould,C02 assembly of decompression type,cigarette machine,high-speed
     sealing machine,drug-making machine,ect.
   • pressure：36-250V
   • power：8-20W/cm2surface area of efficiently heating zone
   • Recommend specification：6︿20×40︿100