Electronic Components - Resistors & Capacitor

FMF Series Flame-Proof Type Metal Film Resistors

METAL FILM RESISTORS
FLAME-PROOF TYPE FMF Series
1/4W, 1/2W, 1W, 2W
FMF-25, FMF-50, FMF-100, FMF-200

INTRODUCTION

The FMF series flame-proof type Metal Film Resistors are manufactured by vacuum deposit metal film on high thermal conductivity ceramic rods, and are coated with layers of gray color flame-proof lacquer.
These FMF flame-proof metal film resistor is designed to replace the metal oxide resistors and low power wire wound resistors, where when flame-prood and small size is needed.

DIMENSIONS:
p20-2.jpg (8460 bytes)

p20-1.jpg (13816 bytes)

FEATURES

  • Power Rating: 0.25W, 0.5W, 1W, 2W.
  • Resistance Tolerance: add.gif (65 bytes)1%, add.gif (65 bytes)5%.
  • T.C.R.: add.gif (65 bytes)50ppm/oc.gif (70 bytes) , add.gif (65 bytes)100ppm/oc.gif (70 bytes).
  • Complete flameproof construction-UL 1412.
  • Value range: 1ohm.gif (71 bytes) ~ 1Mohm.gif (71 bytes)

 p20-3.jpg (27380 bytes)
p21-1.jpg (46166 bytes)
p21-2.jpg (74535 bytes)
p2-3.jpg (6943 bytes)
p22-1.jpg (23022 bytes)
p22-2.jpg (26111 bytes)
 
TAIWAN LEADERS CENTER 8F-A2 NO.29 HAI-PIEN ROAD, KAOHSIUNG, TAIWAN, R.O.C. TEL : 886-7-3353075 FAX : 886-7-3389030