CTH Metallized Polypropylene Film
For High Freguency and High Current Application

• Introduction

CTH are non-inductively wound with a metallized polypropylene film dielectric/electrode, encapsulated in flame retardant (UL94, V-O) plastic case and epoxy resin end seal

• Specifications

• Operating Temperature: ............. -40⁰ ~ + 85
• Rated Voltage: ............. 630. 1000, 1600, 2000 V.AC
• Permissible AC Voltage: ............. 300. 400, 500, 600 V . DC / 60 Hz (rms)
• Capacitance Range: .................... 0.001~0.15F
• Capacitance Tolerance: J( 5%), K( 10%), M( 20%)
• Withstand Voltage:
  a)Between Terminals ... 1.5 x rated voltage for 10s.
  b)Between Terminals and Case ... 2 x rated voltage + 1000 V (1500 V Min.) for 60s.

• Dissipation Factor:

  Frequency	C 0.1 F	0.1F < C 1.0 F
  1 KHz	5 x 10-4	5 x 10-4
  10 KHz	8 x 10-4	10 x 10-4
  100 KHz	30 x 10-4

• Insulation Resistance:
  a)Between Terminals ... 10 x 10³ M
  b)Between Terminals and Case.... 10 x 10³ M Measured at 100 V.DC, 60s and 20
  
  
• Maximum Pulse Rise Time (V/us)

  Rated Voltage	Pitch (mm)
  	15.0	22.5	27.5	32.5
  630	1500	1000	650	600
  1000	4000	2000	1000	800
  1600	6500	4000	2500	1600
  2000	12000	5000	4000	3000