HMP Metallized Polypropylene Film
For Interference Suppression and Across-The-Line, Class X1

• Introduction

HMP are non-inductively wound with a metallized polypropylene film dielectric/electrode, encapsulated in flame retardant (UL94, V-O) plastic case and epoxy resin end seal
1 HMP-A ... Fastion terminals.
2 HMP-S ... Tinned copper clad steel wire radial leads.
3 HMP-W ... Soldering terminals.
4 HMP-P ... UL 1015 or UL 1007 stranded PVC insulation wire.

• Specifications

• Base Specification:
  a)IEC 33(C0) 77 ... Used for AC motor application
  b)JIS C 4908 ... Used for electrical apparatus
• Climate Category: In accordance with DIN40040 HSF
  a)H=Minimum Limit Temperature ... -25
  b)S=Maximum Limit Temperature ... +70
  c)F=Humidity category ... Average relative humidity 75%, 95% for 30 days, per year, continuously; 85% for the remaining days, occasionally.
• Rated Voltage: ............. 250, 350, 400, 450 V.AC, 50~60Hz
• Capacitance Range: .............0.1~15.0F
• Capacitance Tolerance: J( 5%), U( +10, -5%), K( 10%)
• Withstand Voltage:
  a)Between Terminals ... 1.5 x rated voltage for 10s.
  b)Between Terminals and Case ... 2 x rated voltage + 1000 V (1500 V Min.) for 60s.
  This test occasional self-healing breakdown are allowed.
• Dissipation Factor:
  0.1% at 200 V . AC, 60 Hz and 20
• Insulation Resistance:
  a)Between Terminals ...
  10 x 10³ M for C 1.0F; 1 x 10³ M/F for C> 1.0F;
  b)Between Terminals and Case.... 10 x 10³ M Measured at 100 V.DC, 60s and 20